HERO (navy)
Eyebrow: HOUSTON, TEXAS — SPRINKLER INSTALLATION
H1: Sprinkler Installation in Houston
Subhead: Sprinkler installation in Houston — designed lot by lot for the city’s every form: inner-loop shade, mid-century replacements, fringe blank slates.
Buttons: [Call (281) 504-9998] [Text Us]
Trust line: ★★★★★ 5.0 — 75+ five-star Google reviews · Licensed Irrigator LI0029444 · Based in Kingwood, now serving Houston
INTRO
A Houston install starts with a question most suburbs never ask: where does your water actually come from? Inside the city, Houston’s supply is primarily surface water — Lakes Houston, Conroe, and Livingston. Across the unincorporated fringe, your provider is a municipal utility district with its own mains, its own pressure, and its own chemistry. A system designed to a generic pressure assumption waters beautifully on paper and unevenly on your lawn. We test the pressure at your house and design to it. From there, the design follows the lot — and Houston lots come in every form there is: a 1920s inner-loop bungalow lot under mature oaks, a mid-century yard being landscaped for the first time in decades, a brand-new fringe lot starting from bare dirt. Sun and shade mapped honestly, beds and lawn on separate logic, and components chosen for ground that moves: expansive clay that swells and shrinks with the seasons, on land the Subsidence District measures sinking across the metro. We install Schedule 40 pipe and build in the flexibility that shifting clay demands.
WHAT A HOUSTON INSTALL INCLUDES
- Design by sun and shade, not by grid — matched precipitation across every zone, with sunny lawn, shaded corners, and beds on separate schedules.
- Pressure verified at the tap — your actual delivery, city or district, drives head selection and zone sizing.
- 6-inch spray heads that pop clear of the lawn and landscaping, instead of watering the underside of your shrubs.
- Schedule 40 pipe throughout — strength that matters in expansive clay on subsiding ground.
- An in-ground isolation valve with bleeder, set in a 10-inch box, so future repairs shut down cleanly.
- Oversized valve boxes and drip-line filters: room to service the system later, clean water to the drip zones.
- A rain sensor and Rachio Pro smart controller on every install — watering by weather, not by fixed timer.
- Permits pulled and 811 locates called before a single trench opens, every time.
LOCAL ANGLE — One city, every kind of lot
Houston is the one market where a single design template fits nothing. The inner-loop install is a shade-and-roots problem: zones threaded under a mature canopy, heads placed where a hundred years of landscaping left room. The fringe install is a blank-slate problem: full sun, new sod, and a builder-grade stub-out that may or may not be worth building on. The mid-century install is usually a replacement — a system at the end of its life under a yard that has finally grown into itself.
We design each one from the lot, the water source, and the ground — which is why the first step of every Houston install is a visit, not a quote over the phone. The city contains every irrigation problem there is; the design has to know which one it’s solving before the first trench opens.
FAQ — SPRINKLER INSTALLATION, HOUSTON
Q: Why does my water source matter for a sprinkler install?
A: Your provider — the City of Houston or your district — sets the pressure at your tap, and pressure decides how many heads each zone can run evenly. Design to the wrong pressure and you get weak coverage at the far heads or misting at the near ones. We measure before we design. Call (281) 504-9998.
Q: Our builder installed a system when the house was built. Is a new install ever the right answer?
A: Sometimes correction is enough: re-spacing, re-nozzling, splitting zones. When the pipe layout itself is wrong for the yard, we’ll show you why a redesign beats years of corrections — the honest version first, either way.
Q: What pipe and heads do you install?
A: Schedule 40 PVC, 6-inch spray heads, matched-precipitation nozzles, an isolation valve with bleeder in a 10-inch box, and oversized valve boxes — the Kingwood spec, where the clay is just as unforgiving.
Q: Do you handle permits and utility locates?
A: Yes — we pull what’s required for your jurisdiction and call 811 before digging, on every install.
CTA BAND (navy)
H2: A visit first, not a phone quote.
Text: Designed from your lot. Call (281) 504-9998 — Orion’s Rain — (281) 504-9998 — LI0029444.
Buttons: [Call (281) 504-9998] [Text Us]
Sign-off line: Orion’s Rain — (281) 504-9998 — LI0029444
—
MORE FROM ORION’S RAIN
More in Houston: Backflow Testing · Concrete · Drainage Solutions · Fertigation Systems · Landscape Lighting · Pathway Lighting · Pavers · Permanent Lighting · ReveCork · Seamless Gutters · Smart Controllers · Sod Installation · Sprinkler Repair